The Vaporesso GEN 80S Mod delivers exceptional power and performance in a lightweight, durable body. With up to 80W output, advanced AXON Chip technology, and a single 18650 EFEST battery, it provides precise control and outstanding vapor production for all-day vaping.

The Gen80 S box surprises you when you first pick it up both by its incredible light weight and by its feel. Its multi-layer plastic coating breathes quality. This slender, no-frills box is very comfortable to use. The spring-mounted 510 connector can be fitted with atomizers up to 25mm in diameter. It slightly overhangs the deck to avoid scratching it.

The fire button at the top on the front falls naturally under your thumb. It makes a dull click, a sign of quality. Made of metal matching the colour of the box, it looks great and blends seamlessly into the whole. At the bottom of the screen, the three adjustment buttons also make a sharp click. The front ends in a USB-C port enabling the battery to be charged with a maximum current of 2A.

The battery door on the back of the box is firmly attached to the body by two large magnets. There is no lateral play. There is a little slot to facilitate removal.
The polarities are indicated on the battery compartment. The spring-mounted positive contact is positioned at the bottom. The negative contact is fixed. Due to its shape and the very stiff spring, fitting and removing the battery is not easy. If you aren’t careful, the battery wrap can get damaged, which is rather a shame. The lack of vent holes is also regrettable.

When the box is switched on by pressing the fire button five times, the display on the 0.96″ TFT screen is impressive. It is very bright and you can see all the important information at a glance: the power setting, a bar showing the battery life, the coil value and a puff counter.

Navigating in the menus is simple and intuitive. The AXON chipset, which has already proved its worth, offers four vaping modes: variable power, variable voltage, pulse mode and bypass. This wide range will satisfy most vapers. It is also possible to lock the power adjustment by pressing the fire button three times.

Vaporesso has obviously used the iTank again in this kit. It is designed for direct to lung, a role it fulfils perfectly. We won’t go over the details of this clearomizer again, as it was fully tested in the Target 200 kit.
To supplement the kit, Vaporesso provides two mesh type coils: the GTi 0.2ohm with a usage range of 60 to 75W, and the GTi 0.4ohm, which can be used between 50 and 60W.
The Gen 80S kit is pleasant to use. The iTank clearomizer gives it excellent flavours and a powerful vape. The box is light, well-finished and very easy to use on a daily basis.